Installation

1Installation of TV tuner function

1.1Plug the TV antenna or cable TV connection to the “ANT INPUT” on the rear of the TV Tuner Frame.

1.2Connect the “VIDEO OUTPUT” port on the rear of the TV Tuner Frame to the “VIDEO INPUT” port of LCD monitor by using the video cable included.

1.3Connect the “AUDIO OUTPUT” port on the rear of the TV Tuner Frame to the “AUDIO INPUT” of speaker by using the audio cable included.

1.4Plug power connection of power adapter into the “DC 9V IN” port on the rear of the TV Tuner Frame.

2Installation of remote controller

2.1Remove the battery cover on the rear of remote controller.

2.2Insert the batteries included into the slot. Be sure the direction of battery’s pole is correct.

2.3Attach the cover back to the remote controller.

3Setup of TV channels

3.1Turn on the LCD monitor connected to the TV Tuner Frame.

3.2Press the SCAN button on the remote controller to scan all the available channels automatically.

4Installation of photograph to the frame

4.1Remove the photograph inside the frame already. You may need to shake the TV Tuner Frame up and down.

4.2The frame is designed for photographs up to 5” by 3” (12.7 by 7.6 cm) size. You may need to refine the size of your photograph to fit into the frame.

4.3Insert the photograph and be sure it is positioned properly. The photograph should not cover the remote control receiver window. Otherwise, the remote controller will be no function.