24 | Section 3: Installation | AXIS 1610 User’s Manual |
|
|
|
Installing Printers for Printing over TCP/IP
Using Follow the procedure below to install TCP/IP Ports from a AXIS Print Monitor Windows 95/98/Me workstation:
in Windows 95/98
and Windows ME
Local Printer Port 1. Install the AXIS Print Monitor on your workstation. The software is available on the AXIS Product Resources CD.
2.Select Settings Printers from the Start menu and
3.Select Local Printer, as the AXIS 1610 emulates a local printer port and click Next>
4.Choose an appropriate printer driver for your printer. Note: If the desired driver appears in the manufacturer and models list dialog, highlight your selection and click Next> and proceed to step 7.
5.If the desired printer driver is not available, click the Have Disk...
button. Insert the printer driver CD that was provided with your printer, select the CD drive and click OK.
6.Select the desired printer driver from the CD and click Next>
7.Select the TCP/IP port you wish to use and click OK.
Note: The ports will appear in the format <name>_TCP/IP: , where <name> is, by default, AXIS followed by the last six digits of the print server’s serial number (e.g. AXIS560B35_TCP/IP:) Note: If you wish to install a remote TCP/IP port (i.e. if the TCP/IP port does not appear in the list), select the LPT1 port and follow the Remote Printer Port instructions below.
8.Enter a descriptive name for your printer and click Next>
9.Click the checkbox if you want to print a test page and click Finish.
