Canon AXIS 1610 user manual Type the following commands, Example

AXIS 1610 User’s Manual Section 3: Installation 19

Using ARP in

Windows 95/98, ME

& Windows NT, 2000

Notes:

Follow the instructions below to set the IP address using ARP:

1.Start a DOS window.

Type the following commands:

arp -s <IP address> <Ethernet address> ping <IP address>

arp -d <IP address>

Example

arp -s 192.168.3.191 00-40-8c-10-00-86 ping 192.168.3.191

arp -d 192.168.3.191

The host will return Reply from 192.168.3.191 ... or a similar message. This indicates that the address has been set and that the communication is established.

❏When using the Windows 95 implementation of ARP, change the

first line to:

arp -s <IP address> <Ethernet address> <w95host IP

address>, where <w95host IP address> is the IP address of your Windows 95 host.

❏When you execute the ping command for the first time, you will experience a significantly longer response time than usual.

❏By using the arp -dcommand, the static entry in the arp table is removed from the cache memory of the host.