AXIS 1610 User’s Manual | Section 4: Management & Configuration | 47 |
|
|
|
Using SNMP
You can use SNMP (Simple Network Management Protocol) for remotely monitoring and configuring the AXIS 1610. All major functions for print servers are supported.
General Information SNMP refers to a set of standards for network management, including a protocol, a database structure specification, and a set of data objects. The AXIS 1610 SNMP implementation runs in TCP/IP networks.
The management is handled by NMS (Network Management System) software running on a host on your network. The NMS software communicates with network devices by the means of messages, which are references to one or more objects.
A message can be a question or an instruction to a device, or an alarm triggered by a specific event in a device. Objects are contained in data bases called MIBs (Management Information Base), where
The AXIS 1610 supports the following MIBs:
•relevant parts of
•AXIS MIB
•relevant parts of the Host Resource MIB
•relevant parts of the Printer MIB
•relevant parts of the
