28 | Section 3: Installation | AXIS 1610 User’s Manual |
|
|
|
Installing printers for Printing over NetBIOS/NetBEUI
Using
AXIS Print Monitor
in Windows 95/98
and Windows ME
Follow the procedures below to install NetBIOS/NetBEUI ports from a Windows 95/98 or Windows ME workstation:
1.Install the AXIS Print Monitor on your workstation. The software is available on the AXIS Product Resources CD.
2.To start the Add Printer Wizard, select Settings Printers from the Start menu and
3.Click Next> in the first dialog.
4.Select Local printer as the AXIS 1610 emulates a local printer port and click Next>
5.Choose an appropriate printer driver for your printer.
Note: If the desired printer driver appears in the manufacturer and models list, highlight your selection, click Next> and proceed to step 8.
6.If the desired printer driver is not available in the list, click the Have Disk... button. Insert the printer driver CD that was provided with your printer, select the CD drive and click OK.
7.Select the printer driver you want to install from the CD and click
Next>
8.Select the port you want to use from the Available Ports list and click Next>.
Note: The port name is, by default, AXIS followed by the last six digits of the AXIS 1610 serial number, e.g. (AXIS100086:)
9.Enter a descriptive name for your printer and click Next>
10.Click the checkbox if you want to print a test page and click Finish.
