2AXIS 1610 User’s Manual
Safety Notices
Please, read through the following safety notices before installing the AXIS 1610. Caution! - implies that if not followed you may lose data or damage your equipment.
Important: - implies that if not followed the operation of the AXIS 1610 may be impaired.
Do not proceed beyond any of the above notices unless you have taken appropriate measures!
Electromagnetic Compatibility (EMC) notices - USA
This equipment generates and radiates radio frequency energy and if not installed and used in accordance with the instruction manual, may cause interference to radio communications. It has been tested and found to comply with the limits for a Class A computing device pursuant to Subpart B of Part 15 of FCC rules, which are designed to provide reasonable protection against such interference when operated in a commercial environment. Operation of this equipment in a residential area is likely to cause interference in which case the user at his own expense will be required to take whatever measures may be required to correct the interference. Shielded cables should be used with this unit to ensure compliance with the Class A limits.
Electromagnetic Compatibility (EMC) notices - Europe
This digital equipment fulfils the requirements for radiated emission according to limit B of EN55022/1994, and the requirements for immunity according to
Liability
Every care has been taken in the preparation of this manual; if you detect any inaccuracies or omissions, please inform us by contacting your local Axis office. AXIS Communications AB cannot be held responsible for any technical or typographical errors and reserves the right to make changes to the product and manuals without prior notice. Axis Communications AB makes no warranty of any kind with regard to the material contained within this document, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Axis Communications AB shall not be liable nor responsible for incidental or consequential damages in connection with the furnishing, performance or use of this material.
Axis’ Trademarks
AXIS NetPilot, ThinServer.
Other Trademark Acknowledgments
DOS, Ethernet, Internet Explorer, Microsoft, Netscape, Windows, are registered trademarks of the respective holders.
AXIS 1610 User’s Manual | Revision 1.1 |
Part No: 18810 | Date: December 2001 |
Copyright © Axis Communications AB, |
|
|
|
