AOC 2230 user manual Cable Connections On Back of Monitor and Computer Power, Hdmi

Page 5

Cable Connections On Back of Monitor and Computer

1.Power

2.HDMI

3.DVI

4.Analog

5.Audio

6.Earphone

7.USB

Turn off your computer before performing the procedure below.

1.Connect the power cable to the AC port on the back of the monitor.

2.Connect one end of the 15-pin D-Sub cable to the back of the monitor and connect the other end to the comp port.

3.(Optional ¤C Requires a video card with DVI port) - Connect one end of the 24-pin DVI cable to the back of connect the other end to the computer¡fls DVI port.

4.(Optional ¤C Requires a video card with HDMI port) - Connect one end of the HDMI cable to the back of the connect the other end to the computer¡fls HDMI port.

5.Connect the audio cable to audio in port on the back of the monitor

6.Turn on your monitor and computer.

If your monitor displays an image, installation is complete. If it does notTroubleshootidisplay an.ngimage, see

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Windows Warranty StatementWarranty Statement used in EuropeSafety Lamp Disposal Precautions Please setup or remove the base following below steps Hdmi Cable Connections On Back of Monitor and Computer PowerAttaching Wall Mounting Arm Setting the Optimal Resolution What is DCB? Page Page DCR Adjustment Page DCR DDC-CI InstallationFor DCR Noise Noise Phase 100SRGB Recall Srgb Color Temperature from Normal Recall Normal Color Temperature from PresetEeprom CoolPage Page Setting Extra Help DMP main interface，press or for function selection Power button for DMP exit confirmationPage TTL ResolutionVesa DDC2B/CI Horizontal VerticalGND-R VGAGND-G GND-BCEC Plug & Play DDC2B FeatureSCL Tmds Data Shield
Top Page Image Contents