Setting the Optimal Resolution

The recommended resolution for this monitor is 1680 by 1050. To setup the monitor to this resolution, follow the

1.ClickSTART .

2.ClickSETTINGS .

3.ClickCONTROL PANEL .

4.Double clickDISPLAY .

5.ClickSETTINGS .

6.Set the resolutionSLIDE-BAR to 1680 by 1050.

External Controls

Press the power button to turn the monitor on or off. The other control knobs are located at front panel of the changing these settings, the picture can be adjusted to your personal preferences.

*The power cord should be connected.

*Press the power button to turn on the monitor. The power indicator will light up.

1 Eco mode / Up

2 Source(Auto) / Exit

3 Volume / Left

4 DCR / Right

5 Menu / Power

OSD Settings

∙Press the Menu (Power) button to activate the OSD window. Press left, right, up, down button to navigate t functions. Once the desired function is highlighted, press the Menu (Power) button to activate sub-menu .

∙In sub-menu, Press up, down button to navigate through the functions. Once the desired function, is highlig button to button to change the setting. Press Menu (Power) button to return to superior menu.

∙ If you want to adjust any other function, repeat steps 1-2.

∙To exit OSD windows, select exit icon on main OSD, then press the Menu (Power) button .

∙OSD Lock Function: To lock the OSD, press and hold the Left button while the monitor is off and then press turn the monitor on. To un-lock the OSD - press and hold the Left button while the monitor is off and then to turn the monitor on.

∙Eco Mode hot key () : Press the Eco key continuously to select the Eco mode of brightness when there is no mode hot key may not be available in all models).

∙Volume adjustment hot key : When there is no OSD , press) Volumetoactive( volume adjustment bar,orpressto adjust volume ( Only for the models with speakers).

∙DCR hot key () : Press DCR key continuously to active or disable DCR function when there is no OSD.