AOC 203P manual Before YOU Operate the Monitor, Special Notes on LCD Monitors, Features

Page 5

SPECIAL NOTES ON LCD MONITORS

The following symptoms are normal with LCD monitor and do not indicate a problem.

NOTES

•Due to the nature of the fluorescent light, the screen may flicker during initial use. Turn off the Power Switch and then turn it on again to make sure the flicker disappears.

•You may find slightly uneven brightness on the screen depending on the desktop pattern you use.

•The LCD panel used in this monitor is a very high technology product with 5,760,000 thin film transistors giving you fine picture details. Occasionally, a few non-active pixels may appear on the screen as a fixed point of red, green, blue, white or black. Please note that this does not indicate a defective panel.

•Due to the nature of the LCD screen, an afterimage of the previous screen may remain after switching the image when the same image has been displayed for a long time. The monitor will slowly recover from this.

BEFORE YOU OPERATE THE MONITOR

FEATURES

•51cm(20”) TFT Color LCD Monitor

•Crisp, Clear Display for Windows

•Recommened Resolutions: 1600 X 1200 @60Hz

•Ergonomic Design with Height, Pivot, Tilt & Swivel Adjustable Stand

•Space Saving, Compact Case Design

CHECKING THE CONTENTS OF THE PACKAGE

The product package should include the following items:

1.LCD Monitor

2.Owner's Manual

3.Power Cord

4.D-Sub Cable

5.DVI-D Cable

41G2001-615-1A 英文

4

Image 5
Contents 41G2001-615-1A 英文 Table of Contents FCC Class B Radio Frequency Interference Statement Precautions Checking the Contents of the Package FeaturesBefore YOU Operate the Monitor Special Notes on LCD MonitorsPower Source Installation Instructions Swivel BasePowercord Connecting Cables Sub Cable AC Power Cord DVI Cable Controls and Connectors Video CableAdjusting the Viewing Angle External Controls Operating InstructionsGeneral Instructions Auto Adjust button / Exit Power Button / Power IndicatorFront Panel Control Menu / EnterOSD Message HOW to Adjust a SettingMain Sub Menu Description Reset Value Icon Adjusting the Picture简体中文 Plug and Play Plug & Play DDC2B FeatureUsing the Right Power Cord Blue Technical Support FAQ41G2001-615-1A 英文 Input not Supported Error Message & Possible Solution Cable not ConnectedAppendix SpecificationsAuto Config / Exit Preset Display Modes Connector PIN Assignment 41G2001-615-1A 英文