AOC 203P Controls and Connectors Video Cable, Connecting Cables Sub Cable AC Power Cord DVI Cable

CONTROLS AND CONNECTORS

VIDEO CABLE

Connecting the signal Cable: Connect one end of the 15-pin D-Sub cable to the back of the monitor and connect the other end to the computer’s D-Sub port.

Connect one end of the 24-pin DVI cable to the back of the monitor and connect the other end to the computer’s DVI port.

Connecting the Power Cord: Connect the power cord into your LCD monitor’s power input socket, and then plug the other end into a 3-pin AC power outlet. The power cord may be connected to either a wall power outlet or the power outlet socket on your PC, depending on the type of power cord supplied with your LCD monitor.

Caution: If the AC outlet is not grounded (with three holes), install the proper grounding adapter (not supplied).

Figure 2 Connecting Cables

1.D-Sub Cable

2.AC Power Cord

3.DVI Cable

41G2001-615-1A 英文 6