FRONT PANEL CONTROL
∙Power Button:
Press this button to switch ON/OFF of monitors power.
∙MENU / ENTER :
Activate OSD menu when OSD is OFF or
∙Luminance :
Adjust contrast and brightness or function adjust.
*Only adjustable at STD mode(see Brightness Preset below)
∙Brightness Preset:
Switch between STD, OFFICE & VIVID.
∙Auto Adjust button / Exit:
1.When OSD menu is in active status, this button will act as
2.When OSD menu is in off status, press this button over 2 seconds to activate the Auto Adjustment function.
The Auto Adjustment function is used to set the HPos, VPos, Clock and Focus.
∙Power Indicator:
Blue | Power On mode. | |
Orange | Off mode. | |
OSD Lock Function:To lock the OSD, press and hold the MENU button | ||
while the | monitor is off and then press power button to turn the monit | |
on. To
NOTES
∙Do not install the monitor in a location near heat sources such as radiators or air ducts, or in a place subject to direct sunlight, or exce dust or mechanical vibration or shock.
∙Save the original shipping carton and packing materials, as they wil come in handy if you ever have to ship your monitor.
∙For maximum protection, repackage your monitor as it was originally packed at the factory.
∙To keep the monitor looking new, periodically clean it with a soft cl Stubborn stains may be removed with a cloth lightly dampened with a mild detergent solution. Never use strong solvents such as thinner, benzene, or abrasive cleaners, since these will damage the cabinet. As a safety precaution, always unplug the monitor before cleaning it.
10