AOC 193FWK manual Controls and Connectors, Connecting Cables

CONTROLS AND CONNECTORS

Connecting Cables

Turn off your computer before performing the procedure below.

1.Connect the power adapter dc cable to the DC-In port on the back of th monitor.

2.Connect one end of the 15-pin D-Sub cable to the back of the monitor an connect the other end to the computer￿s D-Sub port.

3.Plug the power cable of your monitor into a nearby outlet. Plug the ot end of the power cord into the power adapter.

4.(Optional ￿ Requires a video card with DVI port) - Connect one end of t

24-pin DVI cable to the back of the monitor and connect the other end to the computer￿s DVI port.

5.Turn on your monitor and computer. If you monitor diplays an image, installation is complete. If not, refer to the FAQ (frequently a questions) section for troubleshooting.

Caution: If the AC outlet is not grounded (with three holes), install the p grounding adapter (not supplied).

Figure 2 Connecting Cables

1.DC-Jack Power Cable

2.D-sub Cable

3.AC Power Cord

4.DVI Cable

7