Audio adjust function
PRESET/ADJUST ™/£
AUDIO ADJUST
CINE FLTR 
LATE NIGHT 
Before operating the remote control
Press RCVR/TAPE.
AUDIO ADJUST 
ADJUST 2/3
Using the audio adjust functions
Before operating the remote controller, press RCVR/TAPE.
These functions only work with speaker system A.
Audio Adjust provides various functions for adjusting the sound, including several especially for use with Dolby Digital, DTS, and Pro Logic II source.
The following table lists the Audio Adjust functions, their ranges and default values. Function availability depends on the current source and listening mode, as listed in the “The input source and available listening mode” column. See page 29 for information on listening modes.
Function | Range | Default | Supported | |
|
|
| listening mode | |
Bass | 0 dB | All modes except | ||
Treble | in 2 dB steps | Direct | ||
| ||||
Late Night | Low, High, Off |
| Dolby Digital | |
Cinema |
|
| Pro Logic II Movie | |
| Off | Dolby Digital | ||
Filter | On, Off | |||
| DTS | |||
(Cine Fltr) |
|
| ||
|
| DTS Neo:6 Cinema | ||
|
|
| ||
Panorama | On, Off | Off |
| |
Dimension | 0, 1, 2, 3, 4, 5, 6 |
| Pro Logic II Music | |
Center | 0, 1, 2, 3, 4, 5, 6, | 3 | ||
| ||||
Width | 7 |
|
| |
|
|
|
|
1.Press AUDIO ADJUST (repeatedly) until the item to be adjusted is displayed.
2.Press PRESET/ADJUST ™/£ on the unit or ADJUST 2/3 on the remote controller to adjust the item.
Refer to the right column for AUDIO ADJUST items and settings.
Item | Value or setting |
Note
Cinema Filter and Late Night can also be adjusted from the remote control.
Press the CINE FLTR or LATE NIGHT button to display the current setting (On or Off). To change the current setting, press the same button again.
Remote controller | Remote controller |
30
