Speaker setup
SPEAKER ADJUST
PRESET/ADJUST ™/£
Specifying speaker distances
To get the best from surround sound, it’s important that the sound from each speaker reaches the listener at the same time. To achieve this, you need to specify the distance from each speaker to the listening position.
1.Measure and make a note of the distance from each speaker to the listening position.
2.Press the SPEAKER ADJUST three times.
“Distance Setup” then “Front:” are displayed. To select other speakers, press SPEAKER ADJUST again.
SpeakerDistance
→Front
↓
Center
(Center speaker. The default setting is 12 ft.)
↓
Surr Right
↓
Surr Left
↓
Subwoofer
(Subwoofer. The default setting is 12 ft.)
3.Press PRESET/ADJUST repeatedly to specify the speaker distance.
Use the DISPLAY button to select meters or feet.
You can specify speaker distances of between 1 and 30 ft. in 1 ft. steps. However, the Front Distance limits the Distance of other speakers. The Center Distance and Subwoofer Distance must be within plus or minus 5 ft. of the Front Distance. The Surround Right Distance and Surround Left Distance must be no less than
4.Repeat steps 2 and 3 for all five parameters.
19