AOM - 7694
3. SELECT
Primary Function Input Source Select
-Pressing the SELECT button to sequence the source input modes
SELECT
as indicated in Figure 2.
-Source input modes that are skipped through the menu control function will be skipped. (Figure 3 shows sequence with CAM/INPUT 3 skipped.)
-Source ID is indicated by OSD in the top left corner of the screen.
-Source NAME is indicated by OSD in the bottom center of the screen.
Secondary Function Menu Option Selection
-While in Menu mode, the SELECT button is used to select the highlighted function or option setting.
Third Function Scan Pause / Start
-While in source "SCAN" mode, pressing the select button will stop the scan and display the current source. "Pause" will be displayed by OSD.
Press SELECT again to resume source scan.
CH1 
CH2 
CH3 
CH4
SPLIT(4-WAY) 
SPLIT(3-WAY) 
SPLIT(2-WAY)
Figure 2: Source Select Sequence
(All Source Options "On" )
CH1 
CH2 
CH4
SPLIT(4-WAY) 
SPLIT(3-WAY) 
SPLIT(2-WAY)
Figure 3: Source Select Sequence (CH3 "Skip" )
