Cognitive Solutions Advantage RFID Thermal Printer manual WT ss data

		P R O G R A M M I N G
WT
Function	Write Tag. This command stores the quoted data to
	the RFID-Tag currently positioned over RFID
	Reader/Writer H/W. The data will begin storage at
	the ss Tag-block and extend to and Zero pad any
	unused bytes within the ending block.
Explicit Form	WT ss “data”
Parameters	ss	Starting block to begin reading octets
		(bytes)
	“data” Collection of data octets to be written to
		the RFID tag. The size of "data" must
		be in the range of 1-255 octets.
Response	No specific response
Command Type	RFID Standard Command
Example	To Printer:
	! 0 100 800 0
	DELIMIT $

WT 0 "123-1234-123"

WT 4 "John Q. Public"

WT 10 "Cardiac Care Unit"

RT 0 3 "A" 33

RF HOST "$RF 33$"

END

From Printer:

123-1234-123

NOTE: In this initial Adv-LX RFID Printer, the Skyetek- M1 Reader/Writer Module limits individual Read or Write transfers to/from the RFID-Tags to 64-bytes maximum. CPL command lines are naturally limited to 256-bytes. Therefore, 4 separate 64-byte WT commands must be executed to fill a 256-byte RFID- Tag,

Copyright © 2004, Cognitive. 45