|
| P R O G R A M M I N G |
|
| |
!RFID CONFIRM |
| |
Function | Controls the transmission of a ‘Success’ or ‘Failure’ | |
| indication at the very end of any | |
| command’s execution. | |
Explicit Form | !RFID CONFIRM on/off | |
Parameters | ON | When the setting is ON, the printer will |
|
| return RFID:SUCCESS or RFID |
|
| :FAILURE for every command issued to |
|
| the printer. |
| OFF | When set to OFF, no messages are sent |
|
| to the host. |
Response | In the case of transitioning to the CONFIRM ON | |
| state, the Printer will response by transmitting a | |
| command Success to the Host Machine. | |
| Conversely, in the case of transitioning to the | |
| CONFIRM OFF state, the Printer will have no | |
| specific response resulting from the execution of | |
| this command. | |
Command Type | RFID Setup/Debug Command | |
Example | To Printer: |
|
| !RFID CONFIRM ON |
From Printer:
[RFID:SUCCESS]
NOTE: All
Copyright © 2004, Cognitive. | 53 |