Hi-Touch Imaging Technologies CS-300 user manual Disable when doing

※When you select the YMCKO ribbon as your ribbon type, several options for Resin K will be available.

Disable	The “Resin K” within YMCKO ribbon will not be appli ed to
	print the black section and the black (RGB = 0, 0, 0) in
	graphical objects. It means the color in black (RGB = 0, 0, 0)
	will always be composed by Y, M and C.
Always on	The “Resin K” within the YMCKO ribbon will be appli ed to
	print all of the black (RGB = 0, 0, 0) in the images.
Text only	The “Resin K” within YMCKO ribbon will be applied t o print
	the graphical object- “Text” which is transmitted b y GDI
	command, but will not be applied to the black part in the
	images or the black (RGB = 0, 0, 0) of the graphical objects
	transmitted by the GDI command. For example, the Barcode
	is transmitted by the GDI command, but this option will not
	apply to Resin K within the YMCKO ribbon to the Barcode.
Disable when doing	The “Resin K” within the YMCKO ribbon will be appli ed to
color printing	print all the black (RGB = 0, 0, 0) graphical objects that are
	transmitted by the GDI command, but will not be applied to
	all the black (RGB=0, 0, 0) parts in the images.
Black/White	The “Resin K” ribbon will represent the color graphic/texts
	in black (RGB=0, 0, 0) and white printing style.
Resin Dither	Resin Dither applies different density of black-white
	mixing to transfer color graphic to different black level. If
	the text is the black (RGB=0, 0, 0) graphical object
	transmitted by GDI, then the text will not be shown by
	mixing color, but by the actual contents.

NOTE:

1.Graphical Device Interface, a Windows standard for dividing the images to many graphical objects and transmitting them to output devices, such as monitors and printers.

2.It is recommended to select “Disable doing color printing” if you are not going to use Card Désirée CS to print.

※When you select Resin K ribbon as your ribbon type, then 2 options for the Resin K ribbon will be available: Black/White and Resin Dither.

Black/White The “Resin K” ribbon will represent the color graphic/texts in black (RGB=0, 0, 0) and white printing style.

Resin Dither Resin Dither applies different density of black-white mixing to transfer color graphic to different black level. If the text is the black (RGB=0, 0, 0) graphical object transmitted by GDI, then the text will not be shown by mixing color, but by the actual contents.

20 www.hi-ti.com