BASIC OPERATIONS
These simple steps will enable you to get the best quality sound and image on your closed circuit monitor.
1.Push the power ON/OFF button. The power indicator light comes on.
Power ON/OFF Button
Power Indicator Light
2. Open the control panel.
Control Panel Door
3. Move the function switch to position “CH1” or “CH2” or Auto.
Note:
| Use CH1 or CH2 when using |
|
| only 1 camera. | CH1/CH2/AUTO switch |
| Use Auto when you want to use 2 |
|
| cameras and switch views |
|
| according to your time setting. | Time Selector |
Select the auto switching time.
Don’t forget to remove the camera lens cover.
4.Set the volume
| To increase volume, turn the | Volume Control |
| volume knob (found on the left | |
|
| |
| side of the unit) toward you. |
|
To decrease volume, turn the volume know away from you.
5. Adjust brightness, contrast, and V- | Contrast Control |
Hold to improve the image. |
|
Brightness Control |
|
|