Jwin JV-TV2040 manual To increase volume

Page 9

VOLUME ADJUSTMENT

The jWIN Security Camera has a built-in microphone that delivers high quality sound. You can adjust the sound from your monitor.

To increase volume:

ƒTurn the volume knob (found on the left side of the unit) toward you.

To decrease volume:

ƒ Turn the volume know away from you.

Volume Control

TIME ADJUSTMENT

If you are using two cameras, you will want to adjust the timer to switch or cycle from one view to another every few seconds.

The Time Control knob is located on the right side of the TV Monitor when you are facing the screen. When you look at the knob, you will see that it is marked from 2 seconds to 20 seconds in increments.

Use the knob to indicate when you want to switch views from one camera to another.

To increase the time setting:

ƒWhile facing the monitor screen turn the Time Control knob away from you.

To decrease the time setting:

ƒTurn the Time Control knob toward you.

Time Control

-9-

Image 9
Contents JWIN Set Up for Alternative Audio/Video Connections Introduction Diagram Features With the control panel open, the following items are in view Rear View Putting IT ALL Together Open the control panel To increase volume SET UP for Alternative AUDIO/VIDEO Connections TWO Channel Input Connection SET UP for VCR Connection EIA