Magnetic Stripe Reader, Cash Drawers, Sound Port

MAGNETIC STRIPE READER

The magnetic stripe reader, if installed, will be mounted on the right edge of the TP6000 series. When reading an ISO standard magnetic card, please face the magnetic stripe toward the TP6000 series and slide the card downward through the slot.

CASH DRAWER(S)

The cash drawer control port, if connected to a Posiflex cash drawer, not only provides a way to open the cash drawer through software commands, but also provides a detection method for the software to check the drawer open status for consequent security measures.

The TP6000 series provides one cash drawer connector with the ability to control two cash drawers. When using the standard CCBLA-180 (or CCBLA-180-1) cash drawer cable, the TP6000 has the ability to control one cash drawer. When the optional CCBLA-238 cable is connected to the CR1 port, this gives the TP6000 the ability to control two cash drawers independently. Note: Both cables, CCBLA-180 (or CCBLA-180-1) and CCBLA-238 are designed for use with Cash Drawer models CR3100 or CR3200 or CR4000 or CR4100 only.

DISPLAY RESOLUTION

For best viewing results, please set the TP6X12 display resolution at 800 x 600 with true color in the operating system. For the TP6X15, please set the display resolution at 1024 x 768 with high color. Of course, other resolution as set through the Windows can still obtain a full size display.

SOUND PORT

The optional audio port supports stereo line out. Therefore please connect to a booster speaker if used.

TP6000 USER’S MANUAL 4 - 5