TOUCH PANEL
The touch panel in TP6000 series uses either a PS2 interface or an RS232 interfaced. When its driver is properly installed, this touch panel works exactly like a standard mouse. However, if the system is running under safe mode due to a previous improper shutdown or for any other reason, most drivers are disabled in this mode and the touch panel calibration may not coincide with the mouse pointer. It is recommended that a standard PS2 mouse or keyboard be used in this mode.
All the below mentioned mouse emulation functions can be manipulated through relevant software. The system can give a beep when the touch panel is touched and can respond as if the left button of a PS2 mouse is clicked at the point touched. If the point touched is dragged across the screen surface, it can respond as though it is using the mouse drag and drop feature. If the point is touched, released and touched within a short time interval, it will simulate
TOUCH TERMINAL MANAGER
The touch panel control parameters are already well calibrated in the factory prior to delivery. In principal, the touch panel requires no further calibration once properly set. However, a program named “Posiflex Touch Terminal Manager” is installed in the preloaded Windows system for the user to maneuver versatile features of the touch terminal with a PS2 interface touch panel controller. This program can also be obtained by download from the POSIFLEX web site. This program application provides control over the MSR, the touch panel and the power control of the Posiflex Touch Terminal. For an RS232 interface touch panel, the touch panel portion of the following section should be disregarded. Please refer to the paragraph titled “RS232 TOUCH MONITOR MOUSE” instead.
TP6000 USER’S MANUAL 4 - 6