Mustek TM KB3100 user manual Specifications, Programmability

Page 51

TM

SPECIFICATIONS

CONSTRUCTION:

Spill-proof, 112 keys + 6 position control key

CASE MATERIALS:

ABS 94V0

POWER ON LED:

Green

KEY SWITCH TYPE:

membrane plus rubber dome

KEY STROKE TRAVEL:

3.2 mm

KEY TOP SIZE:

18 x 22 mm for normal keys (ivory)

PREPRINTED KEYS:

“.”, “00”, “0 to “9”

KEY CAP:

18 x 22 mm transparent

PROGRAMMABILITY:

 

METHOD:

Software under DOS, Windows 3.1, or

 

 

Windows95 without TSR program

COVERAGE:

112 keys in 5 pages by 6 position control key

CODE TYPE:

ASCII or scan codes

LANGUAGE:

English or European, software configured

KEY-CONTENTS

LENGTH:

1 - 255 byte(s)/key

MEMORY:

Non-volatile memory, 8KB

INTERCHARACTOR

 

OUTPUT SPEED:

programmable 0 - 140 msec

COMMANDED TIME DELAY:

programmable 0 - 240 sec

MULTILEVEL:

8 levels max.

 

DOWN LOAD SPEED: 40 sec. For 8 KB

CONTROL KEY:

6 positions with programmable answer back

 

code for each position

POSITION CONTROL KEY:

6 positions (LP, L0, L1, L2, L3, L4), key extractable at L0 and L1

Hardware lock off all keyboard input after return signal sent at L0

Capable of giving programmable answer back code of each position on position change of the key

Capable of giving programmable answer back code of each position on receiving a specific code (E7h) from host computer

OUTPUT INTERFACE:

6 pin DIN female connector: connect to host computer

CHAP.

6

6 - 1

Image 51
Contents KB3100 Series Some Important Notes Chap Table of Contents Power on LED KEY Switch Type KEY Stroke Travel KEY TOP Size Page Features OverviewScope Model # Description Model NumbersPackage Contents Chap Cable Connection InstallationKeytop Layout Protuberance Springy wall Double Keyboard Construction ApplicationRange for each key type Preloaded Pattern Print OUT of Preloaded KEY Definitions for page LP MSR Magnetic Stripe Reader Reading magnetic stripe cards of JIS standard Easiness in Programming Programming the Keyboard1 Preparations Answer Back CodePreparation HOT KEY ProgrammingInput the Content to be Programmed WINDOWS95 Installation Utility InstallationChap Chap Chap Chap Chap Chap Chap Chap Windows 3.1 Installation Chap Chap Chap Chap DOS Installation Chap Under WINDOWS95 Starting ProgrammingUnder Windows Under DOS Shortcut Utility RWM.EXE Starting KBM.EXE Posiflex Programmable Keyboard Utility Chap Command Listing in View Mode Command Listing in ASCII-CODE Editing Mode Command Listing in SCAN-CODE Editing Mode Programmability SpecificationsReader specification Mechanical Chap Service and Spare Parts Location Choice Part Number Description Chap Chap