Alignment & Troubleshooting
4.1.2.3 In the Paper Exit Area
1)Open and close the front cover. The jammed paper is automatically ejected from the machine. If the paper is not ejected continue to step 2.
2)Gently pull the paper out of the front output tray. Skip to step 6.
If there is any resistance and the paper does not move when you pull or if you cannot see the paper in the front out- put tray continue to step 3.
3)Open the rear cover.
4)Remove the jammed paper by gently pulling it straight out.
5)Close the rear cover.
6)Open and close the front cover to resume printing.
Service Manual | |
|