Netopia 4622 T1 manual Technical Specifications and Safety Information A-3

Page 41

Technical Specifications and Safety Information A-3

Items (b) and (d) are indicated on the label. The Ringer Equivalence Number (REN) is used to determine how many devices can be connected to your telephone line. In most areas, the sum of the REN's of all devices on any one line should not exceed five (5.0). If too many devices are attached, they many not ring properly.

Service Requirements. In the event of equipment malfunction, all repairs should be performed by our Company or an authorized agent. Under FCC rules, no customer is authorized to repair this equipment. This restriction applies regardless of whether the equipment is in or our of warranty. It is the responsibility of users requiring service to report the need for service to our Company or to one of our authorized agents. Service can be obtained at Netopia, Inc., 2470 Mariner Square Loop, Alameda, California, 94501.

FCC Information. This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the bottom of this equipment is a label that contains, among other information, a product identifier in the format US:AAAEQ##TXXXX. If requested, this number must be provided to the telephone company.

The following information may be required when applying to the local telephone company for leased line facilities:

 

Service Type

SOC

FIC

USOC

 

 

 

 

 

 

 

 

 

 

1.544

Mbps - SF

6.0F

04DU9-BN

RJ-48C

 

 

 

 

 

1.544

Mbps – SF and B8ZS

6.0F

04DU9-DN

RJ-48C

 

 

 

 

 

1.544

Mbps – ESF

6.0F

04DU9-1KN

RJ-48C

 

 

 

 

 

1.544

Mbps – ESF and B8ZS

6.0F

04DU9-1SN

RJ-48C

 

 

 

 

 

A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. See installation instructions for details.

If this Netopia 4622 causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. But if advance notice isn’t practical, the telephone company will notify you as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if you believe it is necessary.

The telephone company may make changes in its facilities, equipment, operations or procedures that could affect the operation of the equipment. If this happens the telephone company will provide advance notice in order for you to make necessary modifications to maintain uninterrupted service.

If trouble is experienced with this Netopia 4622, for repair or warranty information, please see “Service Requirements” on page A-3. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved.

This equipment is of a type that is not intended to be repaired. See “Service Requirements” on page A-3

Electrical Safety Advisory: Users should consider use of a surge arrestor. Telephone companies report that electrical surges, typically lightning transients, are very destructive to customer terminal equipment connected to AC power sources. This has been identified as a major nationwide problem.

Image 41
Contents Netopia 4622 T1 Router Part Number Contents Getting Started Guide Overview Features and CapabilitiesChapter Introduction Getting Started Guide How to Use this GuideWhat You Need Chapter Making the Physical ConnectionsFind a Location Telecommunication Installation Cautions Important Safety InstructionsEthernet Computer Power Identify the Connectors and Attach the CablesPort T1 port Console port Power port Ethernet switch Netopia 4622 T1 Router Status Lights Getting Started Guide Readying Computers on Your Local Network Chapter Connecting to Your Local Area NetworkConnecting to an Ethernet Network Configuring TCP/IP on Windows-based Computers Chapter Sharing the ConnectionConfiguration tab Dynamic configuration recommendedStatic configuration optional Add. Repeat this process for the secondary DNS TCP/IP Configuring TCP/IP on Macintosh ComputersTCP/IP or MacTCP Sharing the Connection Getting Started Guide Chapter Console-Based Management Connecting through a Telnet Session Configuring Telnet software Connecting a Console Cable to Your RouterPC ANSI-BBS Navigating through the Console ScreensAccessing the Easy Setup console screens Chapter Easy SetupEasy Setup Console Screens Getting Started Guide AMI Quick Easy Setup Connection PathHdlc Easy Setup T1 Line Configuration screen appears T1 Line ConfigurationFrame Relay Options PPP Options Previous Screen Next Screen Easy Setup ProfileIP Easy Setup Ethernet IP Address 192.168.1.1 Ethernet Subnet Mask Easy Setup Security Configuration Getting Started Guide Appendix a Technical Specifications and Safety Information Regulatory notices Technical Specifications and Safety Information A-3 Declaration for Canadian users Telecommunication installation cautions Getting Started Guide