Netopia 4622 T1 manual Chapter Introduction, Overview, Features and Capabilities

Page 5

Introduction 1-1

Chapter 1

Introduction

Overview

The Netopia 4622 T1 Router is a full-featured, stand-alone T1 router for connecting diverse local area networks (LANs) to the Internet and other remote networks. The Netopia 4622 T1 Router uses a high performance T1 line to provide your whole network with a high-speed connection to the outside world.

This section covers the following topics:

“Features and Capabilities” on page 1-1

“How to Use this Guide” on page 1-2

Features and Capabilities

The Netopia 4622 T1 Router provides the following features:

Integrated T1 CSU/DSU for fractional or full T1 data service

Permanent connection to the Internet or remote sites at up to T1 speeds (1.54 Mbps)

Wire-speed routing (up to 1.54 Mbps) for all packet sizes

Supports all major T1 deployment models, including ATM, HDLC (Cisco and Copper Mountain), Frame Relay, PPP, and PPP over Frame Relay

DS0 auto-detection for channelized T1 deployments

Eight-port 10/100BaseT Ethernet switch connects easily to an existing LAN environment

The Ethernet switch ports support auto-crossover and half- or full-duplex auto-sensing

Business-class routing features, such as RIP1, RIP2, static routes, and support for multiple subnets on the

LAN

Network Address Translation (NAT), NAPT, and MultiNAT for flexible use of IP addresses and server hosting

DHCP client, server, and relay agent for scalable deployment and private IP address management

Various QoS parameters, including ATM: UBR and CBR; IP: TOS bit prioritization

High availability solutions via LAN connected back-up default gateway router or dial-back via a modem connected to the console port

Built-in firewall, packet filtering on source/destination address, service, and protocol; up to 255 rules in up to 8 filter sets

IPSec VPN Gateway, supporting DES, 3DES encryption, along with IKE or manual key management

Built-in VPN acceleration for wire speed performance

PPTP VPN Gateway, supporting client or server termination

Image 5
Contents Netopia 4622 T1 Router Part Number Contents Getting Started Guide Overview Features and CapabilitiesChapter Introduction Getting Started Guide How to Use this GuideWhat You Need Chapter Making the Physical ConnectionsFind a Location Telecommunication Installation Cautions Important Safety InstructionsEthernet Computer Power Identify the Connectors and Attach the CablesPort T1 port Console port Power port Ethernet switch Netopia 4622 T1 Router Status Lights Getting Started Guide Readying Computers on Your Local Network Chapter Connecting to Your Local Area NetworkConnecting to an Ethernet Network Configuring TCP/IP on Windows-based Computers Chapter Sharing the ConnectionConfiguration tab Dynamic configuration recommendedStatic configuration optional Add. Repeat this process for the secondary DNS TCP/IP Configuring TCP/IP on Macintosh ComputersTCP/IP or MacTCP Sharing the Connection Getting Started Guide Chapter Console-Based Management Connecting through a Telnet Session Configuring Telnet software Connecting a Console Cable to Your RouterPC ANSI-BBS Navigating through the Console ScreensAccessing the Easy Setup console screens Chapter Easy SetupEasy Setup Console Screens Getting Started Guide AMI Quick Easy Setup Connection PathHdlc Easy Setup T1 Line Configuration screen appears T1 Line ConfigurationFrame Relay Options PPP Options Previous Screen Next Screen Easy Setup ProfileIP Easy Setup Ethernet IP Address 192.168.1.1 Ethernet Subnet Mask Easy Setup Security Configuration Getting Started Guide Appendix a Technical Specifications and Safety Information Regulatory notices Technical Specifications and Safety Information A-3 Declaration for Canadian users Telecommunication installation cautions Getting Started Guide