Netopia 3387W-ENT manual Macintosh Macintosh PC Ethernet Switch

Connecting to Your Local Area Network 3-3

If you add devices connected through a hub or switch, connect the hub or switch to an Ethernet port on the Netopia 3387W-ENT.

The Netopia 3387W-ENT in a 10/100Base-T network

To connect your 10/100Base-T network to the Netopia

3387W-ENT through the Ethernet port, use standard Category 5 Ethernet cables with RJ-45 connectors.

Modem

4 3 LAN 2 1 Power Off / On

You can attach additional devices using standard Category 5 Ethernet cables (not provided) connected to a 10- or 100Base-T Ethernet hub or switch. The ports on the router will auto detect 10- or 100Base-T. Crossover cables are not required.

PC

Macintosh-

Macintosh PC

PC

PC

Ethernet

Switch