Netopia 3387W-ENT manual Quick Easy Setup Connection Path, Chap

6-2 Getting Started Guide

Quick Easy Setup Connection Path

This section may be all you need to do to configure your Netopia 3387W-ENT Cable/DSL Wireless Router. Your service provider will supply you with several parameter values. Below is a handy checklist:

	WAN Ethernet Configuration Screen
Enable PPP over Ethernet	❑ Off (default) or
	❑ On
Address Translation	❑ Yes (default) or	Local WAN IP Address
Enabled:	❑ No		_______________________
(if PPPoE is not enabled)			(0.0.0.0 is default)
		Local WAN IP Mask:
		(if Local WAN IP Address is other	_______________________
		than 0.0.0.0)
	Easy Setup Profile Screen (only if PPPoE is enabled)
Address Translation	❑ Yes (default) or
Enabled:	❑ No
IP Addressing	❑ Unnumbered (default)
	❑ Numbered
Remote IP Address:	_______________________	Remote IP Mask:	_______________________
	(127.0.0.2 is default)		(255.255.255.255 is default)
PPP Authentication	❑ PAP (default) or
	❑ CHAP
	❑ None
PAP User Name/		PAP Password/
CHAP Host Name:	_______________________	CHAP Secret:	_______________________
Local WAN IP Address:		Local WAN IP Mask:
(Numbered IP addressing	_______________________	(Numbered IP addressing only)	_______________________
only)	(0.0.0.0 is default)
	IP Easy Setup Screen
Ethernet IP Address:	_______________________	(192.168.1.1 default)
Ethernet Subnet Mask:	_______________________	(255.255.255.0 default)
Domain Name:	_______________________
Primary Domain Name		Secondary Domain Name
Server:	_______________________	Server:	_______________________
Default IP Gateway:	_______________________
IP Address Serving:	❑ On (default) or
	❑ Off
Number of Client IP	_______________________
Addresses:	(100 is default)
1st Client Address:	_______________________
	(192.168.1.100 is default)
	Easy Setup Security Configuration Screen
Write Access Name:	_______________________	Write Access Password:	_______________________