Netopia 3346N-ENT, 3346NENT manual Configuring TCP/IP on Macintosh Computers, Then go to Step

4-2 Getting Started Guide

b. Some Windows versions follow a path like this:

Start menu ->Control Panel ->Network and Internet Connections ->Network Connections ->Local Area Connection ->Properties ->Internet Protocol [TCP/IP] ->Properties

Then go to Step 2.

Step 2. Select Obtain an IP address automatically.

Step 3. Select Obtain DNS server address automatically, if available.

Step 4. Remove any previously configured Gateways, if available.

Step 5. OK the settings. Restart if prompted.

NOTE: You can also use these instructions to configure other computers on your network to accept IP addresses served by the Netopia 4-port ADSL Router.

Configuring TCP/IP on Macintosh Computers

The following is a quick guide to configuring TCP/IP for MacOS computers. Configuring TCP/IP in a Macintosh computer requires the following:

•You must have Open Transport installed, standard in MacOS 8 and higher and optional in earlier system versions.

•You must have built-in Ethernet or a third-party Ethernet card and its associated drivers installed in your Macintosh.