Netopia 3346N-ENT, 3346NENT manual Quick Easy Setup Connection Path

6-2 Getting Started Guide

Quick Easy Setup Connection Path

This section may be all you need to do to configure your Netopia 4-port ADSL Router. Your service provider will supply you with several parameter values. Below is a handy checklist:

	ADSL Line Configuration Screen
Trellis Coding Enabled	❑ On (default) or
	❑ Off
Fast Retrain Enabled	❑ On (default) or
	❑ Off
Data Link Encapsulation	❑ RFC1483 (default) or
	❑ PPP
Data Circuit VPI	0-255 (8 is default)	_______________________
Data Circuit VPI	0-65535 (35 is default)	_______________________
	Easy Setup Profile Screen
Underlying Encapsulation	❑ None (default) or	RFC1483 Mode:	PPP Mode:
	❑ PPPoE	❑ Bridged 1483 (default) or	❑ VC Multiplexed (default) or
		❑ Routed 1483	❑ LLC SNAP
(for PPP DLEs only)	❑ None (default),	(for PAP or CHAP)	(for PAP or CHAP)
PPP Authentication:	❑ PAP or	User Name (or Host Name):	Password (or Secret):
	❑ CHAP	_______________________	_______________________
Address Translation	❑ Yes (default) or
Enabled:	❑ No
IP Addressing:	❑ Numbered (default) or	(for Numbered IP Addressing)	(for Unnumbered IP Addressing)
	❑ Unnumbered	Local WAN IP Address:	Remote IP Address:
		_______________________	_______________________
		Local WAN IP Mask:	Remote IP Mask:
		_______________________	_______________________
	IP Easy Setup Screen
Ethernet IP Address:	_______________________	(192.168.1.1
		255.255.255.0
Ethernet Subnet Mask:	_______________________	are defaults)
Domain Name:	_______________________
Primary Domain Name
Server:	_______________________
Secondary Domain Name
Server:	_______________________
Default IP Gateway:	_______________________
	Easy Setup Security Configuration Screen
Write Access Name:	_______________________	Write Access Password:	_______________________