Netcom NB9 Enter a value between 256 min and 2346 max, Result in poor performance, RTS Threshold

Fragmentation Threshold	Enter a value between 256 (min) and 2346 (max).
	A threshold, specified in bytes, that determines whether packets will be fragmented and
	at what size. On an 802.11 WLAN, packets that exceed the fragmentation threshold are
	fragmented, i.e., split into smaller units suitable for the circuit size. Packets smaller than the
	specified fragmentation threshold value are not fragmented.
	If you experience a high packet error rate, try to slightly increase your ‘Fragmentation
	Threshold’. The value should remain at its default setting of 2346 unless you are
	troubleshooting wireless network issues. Setting the ‘Fragmentation Threshold’ too low may
	result in poor performance.
RTS Threshold	Request To Send, set in bytes, specifies the packet size beyond which the WLAN Card
	invokes its RTS/CTS (Clear To Send) mechanism. Packets that exceed the specified RTS
	threshold trigger the RTS/CTS mechanism. The NIC (Network Interface Card) transmits
	smaller packet without using RTS/CTS.
	The default setting of 2347 (maximum length) disables RTS Threshold.
DTIM Interval	Delivery Traffic Indication Message (DTIM), also known as Beacon Rate. The entry range is
	a value between 1 and 65535. A DTIM is a countdown informing clients of the next window
	for listening to broadcast and multicast messages. When the NB9W has buffered broadcast
	or multicast messages for associated clients, it sends the next DTIM with a DTIM Interval
	value. AP Clients hear the beacons and awaken to receive the broadcast and multicast
	messages. The default is 1.
Beacon Interval	The amount of time between beacon transmissions. Each beacon transmission identifies
	the presence of an wireless client (or access point). By default, WLAN passively scan all RF
	channels and listen for beacons coming from access points to find a suitable access point.
	Before a station (wireless client) enters power save mode, the station needs the beacon
	interval to know when to wake up to receive the beacon (and learn whether there are
	buffered frames at the access point).
	The entered value is represented in ms. Default is 100. Acceptable entry range is 1 to 0xffff
	(65535).
XpressTM Technology	Select ‘enable’ to activate in-built XpressTM Technology 1
54gTM Mode	Select the mode to ‘54g Auto’ for the widest compatibility. Select the mode to ‘54g
	Performance’ for the fastest performance with 54g certified equipment. Set the mode to
	‘54g LRS’ if you are experiencing difficulty communicating with legacy 802.11b equipment.
54g Protection	In ‘Auto’ mode the NB9W will use RTS/CTS to improve 802.11g performance in mixed
	802.11g/802.11b networks. Turn protection ‘Off’ to maximize 802.11g throughput under
	most conditions.
WMM (Wi-Fi Multimedia)	WMM stands for Wi-Fi Multimedia, that provides features that improve the user experience
	for audio, video and voice applications over a Wi-Fi networks.

1.About XpressTM Technology

XpressTM Technology is a Broadcom innovation that dramatically improves wireless performance for suitably equipped client workstations while ensuring compatibility with 802.11b and 802.11g devices. Basically, XpressTM will communicate at the maximum rate sustainable for each class of device, and also provide very fast data transfer rates with other XpressTM-compatible network devices allowing a total theoretical bandwidth of 108Mbps.

If you are communicating with XpressTM-equipped wireless network client machines, enable XpressTM ; otherwise, don’t enable.

NB9/NB9W ADSL2+ VoIP Router	37
YML790 Rev8