Back Panel
Overview
ADSL | Telephone jack |
| line). |
USB | USB port to connect to the USB port on your computer/notebook. |
ETHERNET | 10/100 |
| card or Ethernet Hub / Switch. |
RESET | To reset your ADSL Router to factory default settings. (All customised |
| settings that you have saved will be lost!) |
| Please refer to the section below on how to use the reset function. |
DC | Connect the Power Adapter that comes with your package. |
Resetting Factory Defaults
The restore to factory defaults feature will set the ADSL Router to its factory default configuration by resetting the ADSL Router. You may need to place the ADSL Router into its factory defaults; if the configuration has changed, you lose the ability to configure the ADSL Router via the web interface, or following a software upgrade. To reset the ADSL Router:
■Ensure that your ADSL Router is powered on (for at least 10 seconds).
■Use a paper clip or a pencil tip to depress the reset button for five seconds and release. At this point, the reset is in progress. Do not power off the unit at this point.
■When indicator lights return to steady green, reset is complete. The default settings are now restored.
NetComm NB5 Ethernet/USB Modem Router | YML717 Rev1 |
10 | www.netcomm.com.au |