Advanced
PPPoA Connection Setup
To setup PPPoA, select WAN Setup >New Connection. From Type: select PPPoA. This will reveal the PPPoA Connection Setup screen.
Enter the PPPoA connection name: the name must be unique, must not contain spaces and must not begin with a number [e.g. PPPoA_1].
NAT Option: Network Address Translation is on by default [recommended].
Firewall [SPI]: Firewall is on by default [recommended].
Allow Incoming Ping: Unchecked by default [recommended]. Check only if this function is required for testing purposes.
Select the Quality of Service [QoS] type; if in doubt leave as default.
NetComm NB5 Ethernet/USB Modem Router | YML717 Rev1 |
40 | www.netcomm.com.au |