Neuro Logic Systems RFT-17 Hardware Installation, inch LCD/Keyboard Rack Kit Installation Guide

Page 3
Hardware Installation

17 inch LCD/Keyboard Rack Kit Installation Guide

Hardware Installation

Step

Detail

1.Determine the vertical location for the LCD/keyboard in the rack. Mark the location with tape or a pencil. This product requires one rack unit (1 ¾”) of vertical space. Mount the LCD/keyboard at a convenient height for an average user. (Approx 44” from floor)

Ensure the bottom of the kit is properly positioned in a rack unit

2.Measure the distance from the front rack mounting rail to the rear rack mounting rail. (This distance will be needed during installation of the Rear slide mounting brackets in step 4)

Distance= _____________

Page 3 of 14

Image 3
Contents 17 inch LCD/Keyboard Rack Kit Page 2 of 17 inch LCD/Keyboard Rack Kit Installation GuideHardware Installation StepDetail the outer slide members must be removed to be 8. Extend the slides from the rack Page 6 of Connecting your LCD/KeyboardOperating your LCD/Keyboard On some models the menu panel may be located on the back of the LCDPage 7 of Page 8 of Label Function when notFunction when displaying Activates the Auto AdjustOn-Screen Display OSD Menus Auto-Adjustment will reset all parameters to the factory defaultTrouble Shooting Bad Image Quality Page 12 of Frame Buffer Compatibility LCD Panel SpecificationsKeyboard Specifications General SpecificationsWarranty