Neuro Logic Systems RFT-17 specifications Connecting your LCD/Keyboard, Step, Detail, Page 6 of

17 inch LCD/Keyboard Rack Kit Installation Guide

Connecting your LCD/Keyboard

Step Detail

!Note: Before connecting the LCD monitor/keyboard to a KVM or Sun System, all systems should be turned off.

1.The keyboard and trackball’s design allows its use with most Sun systems. The LCD-17-8P com es with an 8- pin Din keyboard connector, while the LCD-17-USB comes with a USB style connector.

2.The monitor uses a standard HD-15 male video connector. If your Sun system uses a DB13W3 connection, you can use a Sun adapter to interface between the LCD connector and the Sun system. (PN: X3872A)

3.Connect the monitor to a power source. The LCD Monitor’s power supply is auto ranging, and will operate on AC voltages ranging from 90-264 and 50-60 Hz. The monitor uses an IEC 320-C14 connector. An adapter will be required to interface with other connector types.

4.Secure the cables to ensure they will not bind when operating the LCD/keyboard slide mechanism. Cycle the tray in and out of the cabinet to ensure there is enough of a service loop in the cables.

Page 6 of 14