Nesco LD 500/500V 15 user manual DDC Plug & Play

Page 17

LD 500/500V User Manual

Problem

Points to check with possible solutions

Display position is

Adjust the vertical position or horizontal position from the

incorrect

OSD menu. (“Image”, “H-pos” or “V-pos”)

 

If the problem persists, use the graphics board’s utility

 

software to change the display position if available.

The screen is too bright

Adjust the contrast and brightness from the OSD menu.

or too dark

(The backlight of the LCD monitor has a fixed life span.

 

When the screen becomes dark or begins to flicker, please

 

contact your dealer)

The Auto adjustment

The Auto adjustment function is intended for use on

button does not work

Macintosh and IBM compatibles PCs running Windows. It

properly

may not work properly if either of the following applies.

 

- You are running MS-DOS on an AT-compatible PC.

 

- The background color for the “wallpaper” or “desktop”

 

pattern is set to black.

DDC Plug & Play

This monitor provides Plug & Play capability (VESA DDC 1/2B). To utilize this capability, your graphic card and hosting system must also be Plug & Play compatible. When properly set up, the graphic card and hosting system will automatically identify and configure the monitor, and most importantly, optimize its performance.

- 17 -

Image 17
Contents LD 500/500V Federal Communications Commission F.C.C. Statement Table of Contents Please read following instructions before use Safety PrecautionsPower Switch Auto + Menu Mute Control and ConnectorsPC Setting Quick Installation GuideUsing the LCD monitor with Windows 95/98 Connecting the CablesIllustration Attaching the connector cover Adjusting the viewing angle Front Panel Buttons OperationAbout Auto Adjustment On-Screen Display OSD Main Menu Icon Function Function Description Description of OSD FunctionsEnergy Declaration Specifications LDHorizontal 120 , Vertical Pin Assignment Standard Timing TableTroubleshooting DDC Plug & Play To clean the LCD Panel Cleaning the LCD Monitor