LD 500/500V User Manual
Description of OSD Functions
The following is a description of the different choices shown in the main OSD control menu.
Icon Function |
| Function Description | |
| Brightness | Increases or decreases the brightness of the screen image | |
| Contrast | Increases or decreases the difference between dark and light color | |
|
| When “Image” is selected, a | |
|
| appear: | Adjusts the position of the screen image left or right. |
|
| ||
|
| Adjusts the position of the screen image up or down. | |
|
| Clock | Has a frequency tracking feature that offers the user better |
|
|
| screen image stability and clarity. The clock value can be |
|
|
| increased by up to +50. Decreases in the clock value |
| Image |
| (minus) depends on the input timing. |
| Phase | A total of 32 scales (0 to 31) are available for adjusting | |
|
| ||
|
|
| the focus and clarity of the display image. |
|
| Sharp | Specially designed for viewing pictures. A total of 10 |
|
|
| scales are available for adjusting. |
|
| Text/Gfx | This function is to choose a display that allows |
|
|
| maximum text/graphics quality. The resolution can either |
|
|
| be 720 x 400 or 640 x 400 |
|
| Exit | Exits the OSD controls. |
|
| Provides three color adjustment options: | |
|
| 9300K | Sets the CIE coordinate color temperature to 9300K |
| Color | 6500K | Sets the CIE coordinate color temperature to 6500K |
| User | Adjusts the color temperature freely. | |
|
| ||
|
| Auto Gain* The auto gain is used to | |
|
|
| grays to an even balance. |
| Language | Allows users to choose from among six languages for displaying text | |
| in the OSD | ||
|
| Simplified Chinese. | |
| Volume | Raises or lowers the volume of the | |
|
|
| |
| Recall | Returns all adjusted parameters to factory preset values. | |
| Input | Switch between | |
| Exit | Exits the OSD controls. |
*Because of the differences in video signal output levels of graphics boards, disparities can be seen in the color temperature and brightness of the images shown on the monitor, even when the settings are the same. “Auto Gain” corrects irregular video signal output levels to eliminate disparities in color temperature and brightness. This adjustment should be done when a graphics board and monitor are connected. Please refer to the readme.txt file in the Monitor Installation Disk.
- 12 -