3.Select 'Search for a suitable driver for my device (Recommended)' and Click 'Next'.
4.Insert the Driver CD in your
5.Points specify a location, example E:\ Raid5 SATA2_4Port \ SiI3124 \ Windows \ Driver, click Open then OK.
6.When the wizard indicates that it found a driver for the device click 'Next'.
7.If the 'Digital Signature Not Found' dialog appears, click 'Yes' to continue installing the driver.
8.The wizard will now copy the required files to the system and start the driver. After starting the driver the wizard will display a completion dialog, click 'Finish' to exit the wizard.
9.See instructions in section 4.3 to verify controller was installed correctly.
4.3. Verifying controller installation under Windows
2000/XP/2003
1.Right click on 'My Computer' icon, select 'Properties', left click on 'Hardware' tab and then on 'Device Manager' button.
2.Double click on 'SCSI and RAID Controllers', If there is no yellow '!' or '?' in front of 'Silicon Image SiI 3124 SoftRaid5 Controller', the driver is started correctly.
4.To view information about the devices attached to the controller, use the SiICfg Utility and click on the device from the list.
4.4. Update new driver on Windows 2000/XP/2003 with existing
driver
1.Right click on 'My Computer' and select 'Properties'. Under the 'System Properties' section, click on 'Hardware' tab and then on 'Device Manager' click 'SCSI and RAID Controller' and right click 'Silicon Image SiI 3124 SoftRaid5 Controller'.
2.Click 'Driver', 'Update Driver' and select 'Search for a suitable driver for my device[Recommended]'. Insert the Driver CD. Press 'Enter' and select 'E:\ Raid5 SATA2_4Port\SiI3124\Windows \Driver'. Click 'Next' and complete the driver installation.
3.System will go through the enumeration process and install the driver. At the end of the process, click 'Yes' to reboot your system when necessary.
4.See instructions in section 4.3 to verify controller was installed correctly.
- 9 -
