INSTALLATION

Warning

IF YOU ARE DISCARDING AN OLD APPLIANCE THAT HAS A LOCK OR CATCH ON THE DOOR, YOU MUST ENSURE THAT IT IS MADE UNUSABLE TO PREVENT YOUNG CHILDREN BEING TRAPPED INSIDE.

Positioning

This appliance should only be installed at a location where the ambient temperature corresponds to the climate classification indicated on the rating plate, which is located at the left on the inside of the appliance.

Depending upon the position which you choose for your appliance, you may wish to reverse the way in which the door opens. To do this, refer to instructions under “Door reversal”.

Important

It must be possible to disconnect the appliance from the mains power supply; the plug must therefore be easily accessible after installation.

The following table shows which ambient temperature is correct for each climate classification:

SN +10°C to + 32°C

N +16°C to + 32°C

ST +18°C to + 38°C

T +18°C to + 43°C

It should be located in a dry atmosphere, out of direct sunlight and away from extreme temperature e.g. not next to a boiler or radiator, or in a very cold room e.g. an outhouse, where the temperatures may fall below 10°C (50°F). If these temperatures are exceeded i.e. colder or warmer, then the appliance may not operate correctly.

mm100

A mm10 NP002

B

10 mm

You should also ensure that air can circulate freely around the back and the top of the cabinet. There must also be at least 100 mm (4”) distance between the top of the cabinet and any overhanging kitchen furniture (A). Ideally, the appliance should not be positioned beneath overhanging furniture (B).

There should also be a gap of 25 mm either side of the appliance. Do not obstruct the space underneath. The back of the cabinet may be placed close to the wall but must not touch it. DO NOT install in places with restricted ventilation.

Adjust the level of the appliance by screwing out the adjustable foot, or feet, at the bottom of the cabinet using your fingers or a tool (see figure).

Rear spacers

The plastic bag containing all relevant documentation also contains two spacers to be fitted into special holes in the back of the appliance.

Fit the spacers into the holes, taking care to ensure that the arrow (A) is positioned as shown in the diagram. Then turn them through 45° (arrow (A) vertical) until they lock into place.

D200

A

45°

PR60

14

Page 13 Page 15
Page 14
Image 14
Zanussi ZRB 2530 S, ZRB 2530 W user manual Installation, Positioning, Rear spacers
Page 13 Page 15

ZRB 2530 W, ZRB 2530 S specifications

The Zanussi ZRB 2530 S and ZRB 2530 W are versatile refrigerators designed to meet the needs of modern households. Both models cater to a range of preferences, offering sleek appearances in stainless steel and white finishes, respectively. These appliances not only enhance kitchen aesthetics but also integrate advanced technologies for effective food preservation.

One of the standout features of the Zanussi ZRB 2530 series is the 'No Frost' technology. This innovative system eliminates frost build-up inside the freezer compartment, ensuring that users never have to manually defrost again. It also provides consistent temperature distribution, which is essential for maintaining the freshness of stored food. With this technology, the appliances offer reliable and energy-efficient cooling performance.

The refrigerators come with a spacious interior, allowing for an organized and accessible arrangement of your groceries. The adjustable shelves in the fridge section provide flexibility in storage options, accommodating larger items when necessary. The multi-air flow system ensures an even temperature throughout the fridge, which helps in keeping fruit, vegetables, and other perishables at their best for longer periods.

In terms of energy efficiency, both models are rated highly, which aligns with contemporary environmental standards. This not only translates to lower energy bills for households but also contributes to a smaller carbon footprint. The energy-saving features make these refrigerators a smart choice for eco-conscious consumers.

Moreover, the Zanussi ZRB 2530 models come with a number of other convenient features. The door trays are designed for easy access to frequently used items, while the spacious vegetable drawers with humidity control help maintain freshness for fruits and vegetables. The clear design of these drawers also allows users to easily see their contents.

In conclusion, the Zanussi ZRB 2530 S and ZRB 2530 W models exemplify efficiency, practicality, and style. They are tailored for consumers who value functionality and design in their kitchen appliances. With advanced technologies such as No Frost, customizable storage options, and impressive energy efficiency, these refrigerators provide reliable solutions for everyday food storage needs. Whether you choose the stylish stainless steel or the classic white design, both models promise to enhance your kitchen experience.
Top Page Image Contents