2.Select Create RAID set. Press Enter.
3.Select RAID 1 then press Enter.
4.Select Auto configuration. Press Enter.
5.Press Y to save your settings.
6.Press CTRL+E and then press Y to exit the setup.
7.Continue with conventional Fdisk and Format steps as if you are installing a conventional hard drive.
8.Your RAID configuration is complete. Please proceed to software installation section.
3.3. Creating a Mirrored-Striped Set (RAID 10)
1.As the BIOS boots, press CTRL+S or F4 to enter the raid bios utility.
2.Select Create RAID set. Press F2.
3.Select RAID 10 then press Enter.
4.Select Auto config. Press Enter.
5.Press Y and then press ESC to exit the setup.
6.Continue with conventional Fdisk and Format steps as if you are installing a conventional hard drive.
7.Your RAID configuration is complete. Please proceed to software installation section.
3.4. Creating Parity RAID (RAID 5)
1.As the BIOS boots, Press CTRL+S or F4 to enter the raid bios utility.
2.Select Create RAID set. Press Enter.
3.Select RAID 5 then press Enter.
4.Select Auto configuration. Press Enter.
5.Press Y to save your settings.
3.5. Creating JBOD Sets
1. As the BIOS boots, Press CTRL+S or F4 to enter the raid bios utility.
- 6 -
