2.Select Create RAID set. Press Enter.
3.Select JBOD (Single) then press Enter.
4.Select JBOD Drives. Press Enter.
5.Select RAID size. Press Enter.
6.Press Y to save your settings.
3.6. Creating Spare Drive
1.As the BIOS boots, Press CTRL+S or F4 to enter the raid bios utility.
2.Select Create RAID set. Press Enter.
3.Select Spare Drive then press Enter.
4.Select Spare Drives. Press Enter.
5.Select RAID size. Press Enter.
6.Press Y to save your settings.
3.7. Deleting RAID Sets
1.As the BIOS boots, Press CTRL+S or F4 to enter the raid bios utility.
2.Select Delete RAID set. Press Enter.
3.Answer Y to remove the RAID set. If the RAID set being deleted is a Striped set, then all of the data will be lost. If the set being deleted is a Mirrored set, then the data will remain intact and accessible on both drives.
3.8. Rebuilding Mirrored Sets (RAID 1)
1.After replacing the failed hard drives boot the BIOS, Press CTRL+S or F4 to enter the raid bios utility.
2.Select Rebuild RAID 1 set. Press Enter.
3.Select Rebuild Hard Drive. Press Enter.
4.Answer Y to rebuild the Mirrored set of hard drive.
3.9. Resolving Conflict
When a RAID set is created, the metadata written to the disk includes drive connection information (Primary and Secondary). If, after a disk failure, the
- 7 -
