MTD F5D7330UK manual Adapter Settings, Bridge Adapter Name, IP Configuration

Page 22

Using the Web-Based User Interface

Adapter Settings

(a)

(b)

(c)

(d)

(e)

	(i)
	(j)	(f)
	(k)	(g)
	(k)	(h)
	(l)	(h)
	(l)

(a) Bridge (Adapter) Name:

Enter the name of your Wireless Ethernet Adapter here.

(b)IP Configuration:

•Manually set the Adapter’s IP address - The default IP address of your Adapter is 192.168.2.225. You can modify it to match your network subnet if needed. For example, if your network subnet is under 192.168.1.xxx, then you can configure the Adapter to use 192.168.1.225.

•Obtain an IP address from a DHCP server - If you have a DHCP server or a router in your network, you can choose to “obtain an IP address automatically from a DHCP server”. The IP address of your Adapter might change after selecting this option.

(c)IP Address:

IP address must be unique to your network. Default IP address is 192.168.2.225.

20

Image 22

Contents Wireless G Ethernet Adapter Table of Contents Introduction Advantages of a wireless networkBenefits of a Home Network Placement of your Wireless Router or Access Point IntroductionCordless Phone Placement Avoid Obstacles and InterferenceChoose the quietest channel for your wireless network Product Features OverviewApplications and Advantages Package Contents Product SpecificationsSystem Requirements Ethernet Link LED Connecting the Wireless G Ethernet AdapterPower Link LED WAN Link LEDKnowing your Wireless G Ethernet Adapter Install the HardwareConnecting the Adapter Using the Setup Wizard Connecting the Adapter Using the Setup Wizard Connecting the Adapter Using the Setup Wizard Ad-Hoc Computer-to-ComputerDevice Adapter Name SsidChannel IP addressEncryption Subnet MaskRouter Network KeyPassphrase Hex KeyConnecting the Adapter Using the Setup Wizard Using the Web-Based User Interface Setting up your computer to use the Web-Based User InterfaceLogging Out of the Web-Based Setup Connecting the Adapter Logging into the Web-Based SetupUnderstanding the Advanced Web-Based User Interface Status LAN SettingsWlan Settings Quick Navigation LinksIP Configuration Adapter SettingsBridge Adapter Name Gateway IP Address ModeAuthentication Mode Adapter Settings con’t WEP EncryptionKey ID Network Key Ssid Restart Wireless AdapterSite Survey RefreshRestore Factory Defaults Save Current SettingsUpgrade Restore Previous SettingsFirmware Update BrowsePassword Login TimeoutTroubleshooting Can’t connect to a Wireless Network or RouterInstallation CD-ROM does not start Setup Utility Power LED does not come on Adapter is not workingEthernet Link LED does not come on Troubleshooting WAN Link LED is solid but cannot connect to the InternetSignal strength is poor Data transfer is sometimes slowWireless Comparison What’s the difference between 802.11b, 802.11g and 802.11a?Technical Support Europe 00 800 223 55 Australia 1800 666Information Section Information Section Belkin B.V Belkin SAS Belkin GmbHBelkin Tech Support