Remote TURN-ON

M Series amplifiers are designed to operate from a car’s +12 volt, negative ground electrical system. The power and ground cables should be a minimum of 8 gauge. Depending upon the complexity of your system, larger gauge wire may be needed.

The main power cable should run from the amplifier location, through the vehi- cle to the battery, avoiding sharp corners, creases, and sharp body parts. When passing through any metal wall (i.e. fire wall etc.), a grommet must be used to prevent the wire from chafing and shorting to ground.

The M Series amplifiers do not have an on-board fuse. An outboard fuse must be installed in-line with the power wire within 12 inches of the battery. Use the following fuse values at the battery: 121m and 202m: 30 Amp; 404m: 50 Amp. If multiple amps are being used, the fuse value should equal the com- bined total demand of all amplifiers in the system. A second outboard fuse may be added close to the amplifier if desired. Consult your Authorized Xtant Dealer for an appropriate in-line fuse holder that meets the needs of your installation. We suggest crimping and soldering all wire connections. Insulate the connection with heat shrink to prevent a short to ground.

The ground wire should be of the same gauge as the power
wire. As a 'rule of thumb', use as short a length of wire as
possible. Locate an area near the amplifier that is metal (the
floor or an existing unused threaded bolt hole is ideal) and		+12V
clean the area to bare metal. Drill a pilot hole (if necessary)	GROUND	+12V

in the middle of this area. Be Careful! Inspect the area
underneath to be sure you aren’t drilling into wires, brake or
fuel lines, etc. Terminate the wire with a ring connector and
attach it to the bare metal. We suggest crimping and sol-

dering this connection. Insulate the connection with heat shrink. It is important that this connection be solid. After the connection is complete, coat the area with silicone or some similar material to prevent rust from developing.

Once the power and ground wires have been run, it’s time to connect the cable to the amplifier. Be sure that you have not reconnected the ground cable to the negative post of the battery. Cut off excess wire and terminate the wire with a spade connector. We suggest crimping and soldering this connection. Insulate the connection with heat shrink. Locate the power and ground connector. With a small flat bladed or Philips head screw driver, loosen the terminal screws marked: Ground and +12 Volts. Insert each spade connector and secure it by tightening the associated screw. Be sure each connection is tight.

In order for the amplifier to turn on, a remote turn-on wire must be connected to a switched 12 volt source. Typically, the source unit provides a power

M Series specifications

The Xtant M Series represents a significant advancement in the field of audio equipment, merging cutting-edge technology with user-centric design. The M Series is tailored for both professionals and enthusiasts, making it an ideal choice for a wide range of applications, from home audio systems to professional studio environments.

At the core of the M Series is its superior sound quality, characterized by a high dynamic range and low distortion. This is achieved through the incorporation of high-fidelity DACs (Digital-to-Analog Converters) that process audio signals with exceptional precision. The series supports various audio formats, ensuring compatibility with modern digital music libraries. User experience is further enhanced by advanced signal processing technologies that optimize performance across different listening environments.

One of the standout features of the Xtant M Series is its modular design, allowing users to customize their audio setup according to individual preferences and needs. This flexibility is complemented by the availability of multiple output options, including balanced and unbalanced connections, which facilitate integration into existing systems without compromising sound quality.

The M Series also boasts impressive connectivity options, including Bluetooth, Wi-Fi, and USB interfaces. This versatility enables seamless streaming from a variety of devices, making it easy for users to enjoy their favorite music without the constraints of traditional wiring. The intuitive interface, often accompanied by a sleek touchscreen display, simplifies navigation through menus and settings, allowing users to fine-tune their audio experience effortlessly.

Durability and aesthetic appeal are other notable characteristics of the Xtant M Series. Constructed with high-quality materials, these units are designed to withstand the rigors of daily use while maintaining a modern and stylish appearance. Available in different finishes, they can fit into almost any decor, from minimalist to industrial settings.

Additionally, the M Series is equipped with smart features, such as automatic room correction technology that adjusts sound output based on the acoustic properties of the space. This ensures that listeners receive the best possible audio experience, regardless of their environment.

In conclusion, the Xtant M Series stands out in the crowded audio market by offering a robust combination of sound quality, customization, connectivity, and aesthetic design. Its commitment to innovation and user satisfaction makes it a worthy investment for anyone passionate about high-fidelity audio. Whether setting up a home theater system or a professional studio, the M Series delivers an exceptional listening experience that caters to the needs of diverse users.