Xtant M Series manual Glossary

Page 6

GLOSSARY

The following terms are used in this manual. Since they may be unfamiliar, the following definitions are provided.

Bridging: Combining two amplifier channels into one channel. Typically used to create a high-powered mono output.

Gain:The ratio of output voltage to input voltage. The gain on the M Series amplifiers has two different areas of adjust- ment. The input gain jumper offers 40 dB of input gain adjustment while the front panel potentiometer offers 15 dB of amplifier output level adjustment.

LED:Light Emitting Diode. The M Series uses 3 colored LED’s to indicate the operational status of the amplifier. A RED LED for power on/off, YELLOW for low impedance protec- tion and ORANGE for thermal protection.

Load Impedance: Measurement of speaker(s) resistance/reactance that the amplifier must drive. The M Series protection circuitry engages when a load impedance of less than 2 Ω’s is present.

Mixed Mono: The amplifier’s ability to play the Left and Right Stereo channels while playing a third (bridged) mono channel.

Module Port: 18 pin connector located inside the M Series amplifiers designed to connect Xtant’s accessory modules. Each M Series amplifier has two Module Ports for every two channels of input.

PWM:Pulse-Width Modulated power supply. Our regulated PWM maintains a high conversion efficiency over an input supply range of 10.5–15 VDC. The result is less demand on the battery, lower (amplifier) operating temperature, and extremely accurate low frequency reproduction.

Remote Turn-On:Low current, automatic switching circuit that turns the amplifier on and off. Typically connected to the remote antenna or amp turn-on lead of most car radios, cassette, and CD players.

5

Image 6
Contents Page Xtant Technologies Welcome Table of Contents Safeguards Glossary Standard Features + +Internally Bridgeable Front and Rear Input Balanced Line Circuitry Series Amplifier Specifications Model 121M 202M 404MTools / Parts Needed for Installation not Supplied Power and GroundMounting Remote TURN-ON Speaker Connection BridgingAdjusting Input Sensitivity InputsUsing the Balanced Line Circuitry Input Voltage Multiplying FactorOutput Gain Control 24 DB / Octave Crossover Module CM Optional Accessory ModulesBass Boost Module LFQ 12 DB / Octave Filter Modules CM 12H & CM 12LAdding Accessories Modules Expansion Module CompatibilitySetting the 121M’S LOW Pass Crossover Using the Service JumperTroubleshooting Diagnostic LED’STechnical Services Customer RelationsLimited U.S.A. Warranty

M Series specifications

The Xtant M Series represents a significant advancement in the field of audio equipment, merging cutting-edge technology with user-centric design. The M Series is tailored for both professionals and enthusiasts, making it an ideal choice for a wide range of applications, from home audio systems to professional studio environments.

At the core of the M Series is its superior sound quality, characterized by a high dynamic range and low distortion. This is achieved through the incorporation of high-fidelity DACs (Digital-to-Analog Converters) that process audio signals with exceptional precision. The series supports various audio formats, ensuring compatibility with modern digital music libraries. User experience is further enhanced by advanced signal processing technologies that optimize performance across different listening environments.

One of the standout features of the Xtant M Series is its modular design, allowing users to customize their audio setup according to individual preferences and needs. This flexibility is complemented by the availability of multiple output options, including balanced and unbalanced connections, which facilitate integration into existing systems without compromising sound quality.

The M Series also boasts impressive connectivity options, including Bluetooth, Wi-Fi, and USB interfaces. This versatility enables seamless streaming from a variety of devices, making it easy for users to enjoy their favorite music without the constraints of traditional wiring. The intuitive interface, often accompanied by a sleek touchscreen display, simplifies navigation through menus and settings, allowing users to fine-tune their audio experience effortlessly.

Durability and aesthetic appeal are other notable characteristics of the Xtant M Series. Constructed with high-quality materials, these units are designed to withstand the rigors of daily use while maintaining a modern and stylish appearance. Available in different finishes, they can fit into almost any decor, from minimalist to industrial settings.

Additionally, the M Series is equipped with smart features, such as automatic room correction technology that adjusts sound output based on the acoustic properties of the space. This ensures that listeners receive the best possible audio experience, regardless of their environment.

In conclusion, the Xtant M Series stands out in the crowded audio market by offering a robust combination of sound quality, customization, connectivity, and aesthetic design. Its commitment to innovation and user satisfaction makes it a worthy investment for anyone passionate about high-fidelity audio. Whether setting up a home theater system or a professional studio, the M Series delivers an exceptional listening experience that caters to the needs of diverse users.