Mitel WAP54GP manual AP Mode, Administration, Status

Page 18

Wireless-G Access Point with Power Over Ethernet

AP Mode

Use this screen to configure the Access Point operation mode with WDS (Wireless Distribution System).

Administration

You will use the Administration tabs to manage the Access Point.

•Management. This screen allows you to customize the password and Simple Network Management Protocol (SNMP) settings.

•Log. Configure the Log settings for the Access Point on this screen.

•Factory Default. Use this screen to reset the Access Point to its factory default settings.

•Firmware Upgrade. Upgrade the Access Point’s firmware on this screen.

•Reboot. Use this screen to reboot the Access Point.

•Config Management. You can back up the configuration file for the Access Point, as well as save the backup configuration file to the Access Point.

Status

You will be able to view status information for your local network, wireless networks, and network performance.

•Local Network. This screen displays system information, including software & hardware version, MAC address, and IP address on the LAN side of the Access Point.

•Wireless. This screen will display current information on the Access Point and its wireless networks.

•System Performance. This screen will display current information on the Access Point and its data transmissions.

Chapter 5: Setting Up the Wireless-G Access Point with Power Over Ethernet

snmp: the standard network management protocol on the Internet.

firmware: the software image that runs on a CPU inside a networking device.

12

Navigating the Utility

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Wireless- G How to Use this User Guide Copyright and TrademarksTable of Contents Appendix a Troubleshooting Appendix B Wireless SecurityFrequently Asked Questions List of Figures Front Panel21 Administration Factory Default Introduction WelcomeWhat’s in this User Guide? Wireless-G Access Point with Power Over Ethernet Planning Your Wireless Network Network TopologyRoaming Network Layout Front Panel Back Panel Connections for Setup OverviewPlacement Options Stand OptionWall-Mount Option Accessing the Utility Login ScreenSetup WirelessNavigating the Utility AP Mode AdministrationStatus Setup Tab Network SetupIP Settings Setup Time Tab TimeWireless Basic Wireless Settings Tab Wireless NetworkWireless-G Access Point with Power Over Ethernet Disabled Wireless Wireless Security TabWireless Security WPA-Personal aka WPA-PSKWPA2-Personal WPA2-Personal MixedWPA-Enterprise WPA2-Enterprise11 Wireless Wireless Security WPA2 Enterprise Mixed WPA2-Enterprise MixedRadius Wireless Wireless Connection Control Tab Wireless Connection ControlSelect MAC Address From Networked Computers Wireless Advanced Wireless Settings Tab Advanced WirelessWireless-G Access Point with Power Over Ethernet AP Mode Tab MAC Address17 Wireless Repeater 18 Site Survey Web Access Administration Management TabAP Password Local AP PasswordWireless-G Access Point with Power Over Ethernet Administration Log Tab LogWireless-G Access Point with Power Over Ethernet Factory Default Administration Factory Default TabAdministration Firmware Upgrade Tab Firmware UpgradeAdministration Reboot Tab RebootAdministration Config Management Tab Config ManagementStatus Local Network Tab InformationLocal Network Status Wireless Tab 26 Status WirelessStatus System Performance Tab WiredWireless System PerformanceWireless-G Access Point with Power Over Ethernet Appendix a Troubleshooting Frequently Asked QuestionsWhat Ieee 802.11g features are supported? What is the ISM band? Does the Access Point function as a firewall? Appendix B Wireless Security Security PrecautionsSecurity Threats Facing Wireless Networks Security Threats Facing Wireless Networks Wireless-G Access Point with Power Over Ethernet Figure C-1 Firmware Upgrade Appendix C Upgrading FirmwareAppendix D Windows Help Shared ResourcesNetwork Neighborhood/My Network Places Appendix E Glossary Wireless-G PCI Adapter with SpeedBooster Wireless-G PCI Adapter with SpeedBooster Wireless-G PCI Adapter with SpeedBooster Wireless-G PCI Adapter with SpeedBooster Appendix F Specifications Operating Humidity Storage HumidityAppendix G Warranty Information Limited WarrantyAppendix H Regulatory Information FCC StatementWireless-G Access Point with Power Over Ethernet Wireless-G Access Point with Power Over Ethernet Wireless-G Access Point with Power Over Ethernet Wireless-G Access Point with Power Over Ethernet Dual-Band Wireless Access Point Appendix I Contact Information Need to contact Linksys?Information section in this Guide

WAP54GP specifications

The Mitel WAP54GP is a high-performance wireless access point designed to provide seamless connectivity and robust network capabilities for small to medium-sized enterprises. This device is particularly noteworthy for its comprehensive feature set that addresses the growing demand for reliable wireless communication within business environments.

One of the standout features of the WAP54GP is its ability to support Power over Ethernet (PoE), enabling the access point to receive power through the same Ethernet cable that connects it to the network. This eliminates the need for separate power sources, simplifying installation and reducing clutter. The device supports IEEE 802.3af standards for PoE, making it versatile for various deployment scenarios.

The WAP54GP operates on both the 2.4 GHz and 5 GHz frequency bands, leveraging dual-band technology to provide enhanced performance and flexibility. This dual-band functionality not only allows for increased bandwidth but also minimizes interference, making it ideal for environments with numerous wireless devices. The device supports the latest Wi-Fi standards, including 802.11n, ensuring high data transfer rates and improved range.

Another significant aspect of the WAP54GP is its easy management capabilities. The access point comes with a user-friendly web-based interface that allows network administrators to configure settings effortlessly, monitor network performance, and troubleshoot issues. It also supports multiple SSIDs, enabling businesses to segment their networks for different user groups, enhancing security and access control.

Security is a key consideration for any wireless network, and the WAP54GP addresses these concerns with robust measures. It supports advanced encryption protocols such as WPA2 and WPA3, ensuring that user data remains protected against unauthorized access. Additionally, the device incorporates features like MAC address filtering and wireless intrusion detection, providing an extra layer of security.

In terms of scalability, the WAP54GP can be easily integrated into existing network infrastructure. It is designed to work with various network topologies and can be deployed in both standalone and clustered configurations. This flexibility allows businesses to scale their wireless networks according to their growing needs, making it an ideal choice for organizations looking for a long-term, adaptable solution.

Overall, the Mitel WAP54GP is a powerful and multifunctional wireless access point that delivers impressive performance, robust security, and easy management. With its dual-band capabilities, PoE support, and scalable design, it is well-suited to meet the dynamic needs of modern business environments, ensuring reliable connectivity for all users.
Top Page Image Contents