Mitel WAP54GP manual What Ieee 802.11g features are supported?

Page 46

Wireless-G Access Point with Power Over Ethernet

What IEEE 802.11g features are supported?

The product supports the following IEEE 802.11g functions:

•CSMA/CA plus Acknowledge protocol

•OFDM protocol

•Multi-Channel Roaming

•Automatic Rate Selection

•RTS/CTS feature

•Fragmentation

•Power Management

What is Ad-hoc?

An Ad-hoc wireless LAN is a group of computers, each with a WLAN adapter, connected as an independent wireless LAN. An Ad-hoc wireless LAN is applicable at a departmental scale for a branch or SOHO operation.

What is Infrastructure?

An integrated wireless and wired LAN is called an Infrastructure configuration. Infrastructure is applicable to enterprise scale for wireless access to a central database, or wireless application for mobile workers.

What is roaming?

Roaming is the ability of a portable computer to communicate continuously while its user is moving freely throughout an area greater than that covered by a single Access Point. Before using the roaming function, the user must make sure that the computer is set to the same channel number as the Access Point of the dedicated coverage area.

To achieve true seamless connectivity, the wireless LAN must incorporate a number of different functions. Each node and Access Point, for example, must always acknowledge receipt of each message. Each node must maintain contact with the wireless network even when not actually transmitting data. Achieving these functions simultaneously requires a dynamic RF networking technology that links Access Points and nodes. In such a system, the user’s end node undertakes a search for the best possible access to the system. First, it evaluates such factors as signal strength and quality, as well as the message load currently being carried by each Access Point and the distance of each Access Point to the wired backbone. Based on that information, the node next selects the right Access Point and registers its address. Communications between end node and host computer can then be transmitted up and down the backbone.

As the user moves on, the end node’s RF transmitter regularly checks the system to determine whether it is in touch with the original Access Point or whether it should seek a new one. When a node no longer receives acknowledgment from its original Access Point, it undertakes a new search. Upon finding a new Access Point, it then re-registers, and the communication process continues.

Appendix A: Troubleshooting

40

Frequently Asked Questions

Page 45 Page 47
Image 46
Page 45 Page 47
Contents Wireless- G How to Use this User Guide Copyright and TrademarksTable of Contents Appendix B Wireless Security Appendix a TroubleshootingFrequently Asked Questions List of Figures Front Panel21 Administration Factory Default Introduction WelcomeWhat’s in this User Guide? Wireless-G Access Point with Power Over Ethernet Network Topology Planning Your Wireless NetworkRoaming Network Layout Front Panel Back Panel Connections for Setup OverviewStand Option Placement OptionsWall-Mount Option Accessing the Utility Login ScreenWireless SetupNavigating the Utility Administration AP ModeStatus Network Setup Setup TabIP Settings Setup Time Tab TimeWireless Basic Wireless Settings Tab Wireless NetworkWireless-G Access Point with Power Over Ethernet Disabled Wireless Wireless Security TabWireless Security WPA-Personal aka WPA-PSKWPA2-Personal WPA2-Personal MixedWPA-Enterprise WPA2-Enterprise11 Wireless Wireless Security WPA2 Enterprise Mixed WPA2-Enterprise MixedRadius Wireless Connection Control Wireless Wireless Connection Control TabSelect MAC Address From Networked Computers Wireless Advanced Wireless Settings Tab Advanced WirelessWireless-G Access Point with Power Over Ethernet AP Mode Tab MAC Address17 Wireless Repeater 18 Site Survey Web Access Administration Management TabAP Password Local AP PasswordWireless-G Access Point with Power Over Ethernet Administration Log Tab LogWireless-G Access Point with Power Over Ethernet Factory Default Administration Factory Default TabAdministration Firmware Upgrade Tab Firmware UpgradeAdministration Reboot Tab RebootAdministration Config Management Tab Config ManagementInformation Status Local Network TabLocal Network Status Wireless Tab 26 Status WirelessStatus System Performance Tab WiredWireless System PerformanceWireless-G Access Point with Power Over Ethernet Appendix a Troubleshooting Frequently Asked QuestionsWhat Ieee 802.11g features are supported? What is the ISM band? Does the Access Point function as a firewall? Security Precautions Appendix B Wireless SecuritySecurity Threats Facing Wireless Networks Security Threats Facing Wireless Networks Wireless-G Access Point with Power Over Ethernet Figure C-1 Firmware Upgrade Appendix C Upgrading FirmwareShared Resources Appendix D Windows HelpNetwork Neighborhood/My Network Places Appendix E Glossary Wireless-G PCI Adapter with SpeedBooster Wireless-G PCI Adapter with SpeedBooster Wireless-G PCI Adapter with SpeedBooster Wireless-G PCI Adapter with SpeedBooster Appendix F Specifications Operating Humidity Storage HumidityAppendix G Warranty Information Limited WarrantyAppendix H Regulatory Information FCC StatementWireless-G Access Point with Power Over Ethernet Wireless-G Access Point with Power Over Ethernet Wireless-G Access Point with Power Over Ethernet Wireless-G Access Point with Power Over Ethernet Dual-Band Wireless Access Point Need to contact Linksys? Appendix I Contact InformationInformation section in this Guide

WAP54GP specifications

The Mitel WAP54GP is a high-performance wireless access point designed to provide seamless connectivity and robust network capabilities for small to medium-sized enterprises. This device is particularly noteworthy for its comprehensive feature set that addresses the growing demand for reliable wireless communication within business environments.

One of the standout features of the WAP54GP is its ability to support Power over Ethernet (PoE), enabling the access point to receive power through the same Ethernet cable that connects it to the network. This eliminates the need for separate power sources, simplifying installation and reducing clutter. The device supports IEEE 802.3af standards for PoE, making it versatile for various deployment scenarios.

The WAP54GP operates on both the 2.4 GHz and 5 GHz frequency bands, leveraging dual-band technology to provide enhanced performance and flexibility. This dual-band functionality not only allows for increased bandwidth but also minimizes interference, making it ideal for environments with numerous wireless devices. The device supports the latest Wi-Fi standards, including 802.11n, ensuring high data transfer rates and improved range.

Another significant aspect of the WAP54GP is its easy management capabilities. The access point comes with a user-friendly web-based interface that allows network administrators to configure settings effortlessly, monitor network performance, and troubleshoot issues. It also supports multiple SSIDs, enabling businesses to segment their networks for different user groups, enhancing security and access control.

Security is a key consideration for any wireless network, and the WAP54GP addresses these concerns with robust measures. It supports advanced encryption protocols such as WPA2 and WPA3, ensuring that user data remains protected against unauthorized access. Additionally, the device incorporates features like MAC address filtering and wireless intrusion detection, providing an extra layer of security.

In terms of scalability, the WAP54GP can be easily integrated into existing network infrastructure. It is designed to work with various network topologies and can be deployed in both standalone and clustered configurations. This flexibility allows businesses to scale their wireless networks according to their growing needs, making it an ideal choice for organizations looking for a long-term, adaptable solution.

Overall, the Mitel WAP54GP is a powerful and multifunctional wireless access point that delivers impressive performance, robust security, and easy management. With its dual-band capabilities, PoE support, and scalable design, it is well-suited to meet the dynamic needs of modern business environments, ensuring reliable connectivity for all users.
Top Page Image Contents