Mobility Electronics NP644 specs

FieldDescription

Please enter a key. If you are joining an existing network, ask the Administrator for the key. If you are setting up the network, create a key; any combination of letters and numbers up to 32 characters with no spaces.

Auth. Mode: There are three modes available to choose from:

•Open Authentication – the sender and receiver do not share a secret Key for communication. Instead, each party generates its own key-pairs and asks the other party to accept it. The key is regenerated when the connection is established every time.

•Shared Authentication – the sender and receiver shares the common key for data communication, and the key is used for extended length of time.

•Auto – requires communication to be established, and automatically use the proper authentication mode.

The following will only be activated to allow for conﬁguration when Encryption is enabled.

Default Key:	Select one of the 4 keys to use.
Network Key:	Choose the encryption, either in HEX or ASCII formats, and enter
	the password in the blank space.
Key Length:	Select 64 or 128 bits as the length of the keys
Key Format:	ASCII or HEX

NP644 IEEE 802.11g Wireless Network USB Adaptor	23
YML787 Rev1

FieldDescription

Default Key:

Select one of the 4 keys to use.

Network Key:

NP644 IEEE 802.11g Wireless Network USB Adaptor

YML787 Rev1