Matsushita CF-18JHU80TW Removing the Audio PCB Removing Main PCB, Removing PAD PCB and I/O

7.6. Removing the Audio PCB	7.8. Removing Main PCB
Audio PCB	<M>
<H>	<M>
	HDD Guid Plate
		<L>	Connector (CN17)
Connector (CN702)
	Connector (CN36) <N>		Connector (CN8)
			Connector (CN3)
Connector (CN701)	<N>		Connector (CN9)
			Connector (CN14)
	Connector￿		LAN Cable
	(CN23)
	Main PCB		<N>
	Connector (CN35)		Connector (CN12)
	Connector (CN30)		<N>
	PCMCIA Unit		to Connector (CN17)
			to Connector (CN8)

Figure 10

1. Remove the two Screws. <H>

2. Disconnect the two Cables from two Connectors (CN701, CN702).

3. Remove the Audio PCB. Screw<H>: DRSB2+5FKL

7.7. Removing the Wireless Module,					Figure 12
Port PCB and Modem PCB				1.	Disconnect the eight Cables from eight Connectors
<K>	<J>	<I>	<I>		(CN3, CN9, CN12, CN14, CN23, CN30, CN35, CN36).
				2.	Remove the Screw. <L>
<K>		Modem ￿	<I>	3.	Remove the two Screws. <M>
			Port PCB	4.	Remove the four Screws. <N>
		PCB		5.	Remove the Main PCB.
				6.	Disconnect the two Cables from two Connectors (CN8,
Bat Con Angle			Wireless Module		CN17).
				7.	Remove the PCMCIA Unit.
					Screw<L>: DRSB2+5FZL
			Connector (J5)		<M>: DXYN2+J12FNL
					<N>: DXYN2+J18FN
			Connector (J6)
				7.9. Removing PAD PCB and I/O
					PCB

Figure 11

1.Disconnect the two Antenna Cables from two Connectors (J5, J6).

2.Remove the Wireless Module.

3.Remove the three Screws. <I>

4.Remove the Port PCB.

5.Remove the Screw. <J>

6.Remove the Modem PCB.

7.Remove the two Screws. <K>

8.Remove the BAT CON angle. Screw<I>: DRSB2+5FKL <J>: XSB2+4FNL

<K>: DRSB2+5FKL

<O><O>			<Q> I/O PCB
Connector ￿	<O>	PAD PCB	<Q>
(CN801)

<P>

Figure 13

1.Disconnect the Cable from Connector (CN801).

2.Remove the three Screws. <O>

3.Remove the PAD PCB.

4.Remove the four Screws. <P>

5.Remove the two Screws. <Q>

7-3