5 Self Diagnosis Test
Floppy disk is Included for the
1.System password
If the password function has been turned on, you will need to ask the user for the password before performing the
2.FDD test
Performing the FDD test will erase the contents of the floppy disk you insert into the drive. Use a formatted disk that has no contents or whose contents are not required. This product has a password function. However, if this function is turned on, the
5.1. Outline of Self Diagnostic Tests
Insert the diagnostics floppy disk
Return the setup contents to default
Starting up the setup utility
Turn on the power.
When "Panasonic Press F2 to enter setup" appears on the screen, press F2.
Press " | " to select | Exit |
Press " | " to select | Get default value |
Press Enter. |
| |
Choose Yes for "Load default Configuration now?"
Select "Save Values & Exit" and press Enter.
Choose Yes for "Save Configuration changes and exit now?" and press Enter.
Choose test from the menu screen to start the test.
Caution:
After completing repairs, be sure to carry out the Automatic test and Peripheraltest.
Menu Screen
1.DIAG on FD
2.DIAG on FD
3.LAN Test
4.Modem Test
5.Wireless LAN test (Wireless LAN Model only)
6.Button Test
Q. Quit
Select please [ 1, 2, 3, 4, 5, 6, Q ] ?
<Automatic test> | <Peripheral test> | <Test selection> |
Tests selected (O) from the test | The parallel port and | Specifc tests required can |
item list will be performed in | drive can be tested. | be freely selected and |
succession. | (See 5.3 for details.) | performed from the test item |
|
| list. |
DIAG on FD
3.LAN Test
4.Modem Test
5.Wireless LAN test (Wireless LAN Model only)
6.Button Test
Be sure to carry out the Selection test only when necessary.
Problems in the unit are located and divided according to error messages that occur during testing.