Matsushita CF-18JHU70TW service manual Laser Safety Information

Page 3

LASER SAFETY INFORMATION

For U.S.A.

Class 1 LASER-Product

This product is certified to comply with DHHS Rules 21 CFR Subchapter J.

This product complies with European Standard EN60825 (or IEC Publication 825)

For all areas

This equipment is classified as a class 1 level LASER product and there is no hazardous LASER radiation.

Caution:

(1)Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

(2)The drive is designed to be incorporated into a computer-based system or unit which has an enclosing cover. It should never be used as a stand alone drive.

Danger:

The serviceman should not remove the cover of drive unit and should not service because the drive unit is a non- serviceable part.

Please check DANGER label on PD-drive unit.

Unplug the AC power cord to the equipment before opening the top cover of the drive.

When the power switch it on, do not place your eyes close to the front panel door to look into the interior of the unit.

LASER Specification

Class 1 level LASER Product

Wave Length: DVD 658±8 nm

CD 775~815 nm

Laser safety information is appropriate only when drive with laser is installed.

2

Image 3
Contents CF-18 Page Laser Safety Information Page Page Contents Page Power-On Self Test Boot Check Stuck key 02D0 System cache error Cache disabled Preparation EquipmentSelf Diagnosis Test Outline of Self Diagnostic TestsList of main test items Automatic TestPeripheral Test LAN Test Modem Test Wireless LAN TestTest Selection End of test Test classification Screen display test items Contents Error Messages and TroubleshootingWiring Connection Diagram Disassembly/Reassembly Removing the Speaker Removing the Rear CabinetRemoving the DU Lid Unit Removing the Wireless Module Port PCB and Modem PCB Removing the Audio PCB Removing Main PCBRemoving PAD PCB and I/O Removing LED PCB and Switch Removing the CPU Heat Plate and Lithium BatteryRemoving the Display unit DXYN2+J6FNL Removing the LCD HingePcmcia LID Assy Removing Each CoverExploded View BT1 2 + 0.02N m + 0.2kgf cm K83 K82 K13 K10 K20 K401 K600 K80 K409 K80-9 K210 K200-30 K211 K200-30-4 18 + 0.02N m + 0.2kgf cm Screw tightening torque Replacement Parts List Packing Material USB LID Rubber DFHR3535ZA Speaker Cable Tube LCD Front CABINET/TS Panel Assy DXYN2+J6FNL Screw DFHR6220ZA Dimm Holder